3D Steering Arm CAD Model

I need a production-ready 3D model of a single steering arm together with a fully dimensioned 2-D part drawing.

Scope
The upright side of the arm must follow my bolt pattern; I will supply the exact PCD and bolt sizes once the project starts. On the opposite end I want a rod-end seat for the tie-rod, not a simple drilled hole or spherical bearing cup. The default material should be EN24 steel—please confirm its suitability or suggest an equivalent grade before finalising wall thicknesses and radii.

Design guidance
• Keep weight down with sensible pockets, generous fillets and absolutely no sharp inside corners in high-stress areas.
• Maintain adequate clearance for typical ½-in rod ends; confirm final seat diameter with me.
• Preserve the bolt head and tool access around the mounting pattern.

Deliverables
1. Native CAD (SolidWorks, Fusion 360 or Creo) plus a STEP file.
2. Detailed 2-D drawing with all critical dimensions, tolerances, thread specs and material call-out.
3. Mass and basic FEA screenshots or hand calculations showing the design meets typical steering loads (static 12 kN radial as a reference).

Acceptance
The job is complete when the model assembles with my upright and tie-rod library parts without interference, the drawing is clear enough for CNC machining, and material + weight targets are met.

---
來源：Freelancer.com | 出價次數：3 | 剩餘時間：6 日 | 專案類型：固定預算